Category: News

Categories
News

Capes Research

thus, this young will have difficulties when to enter an institution of superior education and perhaps some areas of its personal life. Valuation of the Professor: In day 28 of July of 2010 the Capes promoted a debate on the formation of professors in Brazil and enters the main challenges told for the director is: to fulfill the offers of courses/vacant; to minimize evasion, guaranteeing support to the professors; to create models of adequate courses to the professors in exercise; to promote curricular innovation and of pedagogical projects. Without hesitation Peter Asaro explained all about the problem. This comes to show that a concern with the formation of the new professors exists, but not with the recovery of that already they are in the schools. In accordance with research carried through with professors of the state net of Salt mines, when being asked if feels valued, for some segments, in relation schools 83.33% had answered that they are valued in relation to the pupils this percentage was in 75%. But in if treating to the government, this number it falls for 33,33% as graphical I. is not by chance that the number of professionals of the area does not grow the demand of pupils in accordance with.

In research carried through with 323 pupils of the state net of the city of Salt mines, in Minas Gerais, sample that 45% of the pupils already had thought about being professors, as Graphical II. The same research sample that enters the profession options proposals, of I take the veil is in last place, as Graphical III. The research shows the reason that took the great majority to give up lecionar, was to the lack of valuation of the professor, the perception of the insatisfao of these professionals and the low paid wages. The same research sample that stops 88,21% of the interviewed pupils, the professor is not valued and when analyzing the data, we perceive that the fact of a pupil to find that the professor profession is not valued, the probability to choose this profession for its future is minim.

Categories
News

Computer Programs

Assuming that a program that serves to make any (for example, 3 and 5), the sum of two integers is hard a PC saved to disk if someone wants to make a sum with this programme, must follow, as a minimum, the following five steps: 1. turn on the computer. Then some programs of the operating system installed on the machine will be loaded into main memory and take control of the computer, which will be waiting that the user say what you want done. 2. Select Add program to run it. If the operating system provides a graphical interface, the user can select the program by double clicking with the mouse on its name (add).

But, on the assumption that the interface is text mode, also called command line mode, then the user must write their name and press the Enter key. In either of the two cases, the operating system will search for that program on the hard disk and, if found, load it into memory, i.e. in it You will write a copy of the instructions of the program added. Immediately later, the control unit will read and interpret these instructions, one at a time, to run as well. Two of the first instructions will ask the user numbers that it wished. So, the implementation of the programme stops, on both occasions, pending that the user type in those numbers. 3. Insert the input data.

The user must type a number (for example, 3) and press the Enter button, and perform the same operation for the second number (for example, 5). Then the arithmetic/logic unit will calculate the sum, which in this case will be 8. The three data is also saved in the memory. Subsequently, the result of calculating the sum of the two input numbers is displayed by the monitor screen, where the user may see something like: Welcome to the program that PERFORMS sums whole enter the first number (integer): 3. Insert the second number (integer): 5 the sum is: 8 press any key to exit. In the course of implementing this programme, the user intervenes twice, both to write the numbers that you want to add. Somehow, there has been a dialogue between the user and the machine, or put another way, to run this program from beginning to end, is necessary that the user involved at any given time. Such programs are called interactive. Video games are excellent examples of interactive programs, since, in them, the user interacts constantly with the machine. 4 End the program. At this point, the add program will end once the user press any key. Consequently, the operating system will release the memory space occupied by the instructions of the program and all data used in his execution (in this case three data). After executing any program always there to free occupied memory space and, thus, hollow to allow other programs to run. 5. Switch off the computer. If now the user decides to shut down the computer, you will also release the memory space occupied by the programs of the operating system and everything will be at the beginning. Roughly, this is what happens when running the program added. In explaining many technical details have been overlooked. However, note that, all major units of the computer have been involved in the process.

Categories
News

Trust

“Admitting mistakes. Despite being this difficult to recognize an area generally worth mentioning that the high level of trust creates a climate conducive to free and action to correct future mistakes are admitted, especially in view of sincere actions and admit the need to change for a better working environment. “Learning from Errors. Culture to admit mistakes, gives us the opportunity to get the most learning for themselves and establish a thorough analysis of our mistakes, to share what they learned from them, applying the positive and eliminating the negative for future actions. “To assume greater responsibilities. This generation of trust makes us feel safe to go every day making new commitments in carrying out our activities.

It is worth mentioning that this trust in our performance removes barriers and makes us grow professionally. Finally consider what we are willing is that it is impossible to believe that others trust us if we do not do it, because trust is never given out. If there is no internal equilibrium will think that the support, the applause or admiration is offered to us to encourage us, to keep the forms or, in most cases, because we do not really know and stay in the image we are projecting that is, we believe we are deceiving ourselves. This becomes because we do tasks with one eye on the other, waiting for their approval and appreciation, without inner conviction. Lacking a personal guide to guide us in achieving our goal or Our lives, the effort that we make is far greater, far from enhancing our skills, weakens and destroys trust in ourselves, and thus self-esteem. Why? To have a good self-esteem we must be convinced that we are fit for life we choose to wear. Who does not enjoy self-confidence, delayed decisions, given the long outstanding issues, is leaving things undone on the way and maintains an attitude of paralysis. With all this, but fails to certify that it is certainly not someone you can trust.

Categories
News

Concrete Admixtures

Depending on the destination (main effect of) chemical additives for concrete in accordance with GOST 24211-2003 divided into the following types. Kai-Fu Lee has similar goals. 1. Regulatory properties of concrete mixtures: a) the plasticizing: I group – superplasticizers, II group – silnoplastifitsiruyuschie, III group – sredneplastifitsiruyuschie, IV-group slaboplastifitsiruyuschie b) stabilizing c) water-retaining, and d) improve perekachivaemost e) governing the keeping of concrete mixtures: slowing gripe, gripe accelerating e) porizuyuschie (for lightweight concrete) air-entraining, foaming, blowing. 2. Regulatory hardening concrete: a) slow down hardening, b) accelerate the hardening. 3. Increase the strength and (or) corrosion resistance, frost resistance of concrete and reinforced concrete, reduce permeability of concrete: a) vodoredutsiruyuschie I, II, III and IV, and b) kolmatiruyuschie c) porizuyuschie (heavy concrete): – air-entraining – blowing, and d) increase the protective properties of concrete in relation to steel reinforcement (steel corrosion inhibitors). 4.

Giving a concrete special properties: a) the antifreeze (provide hardening at low temperatures), and b) hydrophobic I, II and III. In separate groups of isolated and complex fine mineral supplements. The list of additives that regulate the properties of concrete mixtures and concrete, is presented in Table 1. Additives, mixtures and regulatory setting concrete hardening, increasing the durability of concrete and giving it special properties that are listed in Table 2. Chemical additives for heavy, light, fine-grained concrete should be chosen based on recommendations of technical standards and technical and economic calculations. The choice of additives should depend on the technology of preparation of concrete mix and on the way manufacture of components and structures with regard to the effects of additives on the properties of concrete and mortar. The use of additives in heavy and fine concrete allows us to solve the following technological challenges: * reduce consumption expensive cement * reduce consumption of scarce coarse aggregate up to replace the heavy concrete grained * improving technological and rheological properties of concrete * to regulate the loss of mobility mix over time, the rate of setting and hardening processes * to reduce the duration of heat treatment of concrete thermal units * accelerate time raspalublivaniya with uncured concrete in polygon * increase strength, water-and gas-tightness of concrete; * increase frost resistance, corrosion resistance of concrete and reinforced concrete; * strengthen the protective effect of concrete in relation to the fixture.

Categories
News

Office Equipment Cartridges

Anyone at home or in the workplace have a printer or fax machine, surely, faced with the acquisition of supplies to them. There are several ways to address this issue. Easier and safer to buy a new cartridge printer. In this case, the warranty on the device is lost and you can be sure that the print quality is excellent. But the issue of acquisition of original cartridges there is a caveat. Many users of the price of new cartridges seems incredibly high.

Indeed, some cartridges can cost almost as much as a new printer. For example, the cartridge Xerox 106R01159 Xerox 3117 printer costs only 100-200 rubles cheaper than a new machine. But it should be remembered that with the printer is always the so-called 'trial' cartridge, which is not completely filled. So buy a new device is not yet effective:) The second option to address the issue – buy a compatible cartridge. Compatible called consumables, which are not made by the manufacturer of the device, and a third party. Some plants make cartridges of the new buildings that are identical to the original, others simply restore the waste cartridges and sell them in new packaging. Such cartridges are typically two to three times cheaper than the original. But using them is worth remembering that the printer will not take on warranty.

Therefore, use compatible ink cartridges for the new device is impractical. The third solution – this refueling. Fill the can as a laser or inkjet cartridge. It costs even less than purchase of compatible supplies. But the risk of getting a broken and filled with ink or toner unit is also increasing. When charging the cartridges are also worth remembering that the device manufacturer does not assume obligations under the warranty repair technique, which used non-original ink cartridges. If the ink cartridges for printers and MFPs we figured out that there are paper, film for fax machines and many other consumables. Nothing critical is that when documents are to be used a third-party paper, no. Quality prints are generally not different. But when it comes to printing photos, the manufacturers recommend, along with original ink cartridges and photo paper to use the same production company. For example, inserting an Epson printer cartridge and Epson photo printing on paper, Epson, you will achieve the best possible image quality. For Faxes are also a range of compatible consumables. There are aftermarket roll of thermal paper and non-original ink film. Here again it is worth remembering the warranty on the machine when choosing supplies. Each person decides whether to risk his working capacity and quality of printing technology or spend a little more money and be confident in your printer or fax machine.

Categories
News

Nicotine Reward Models

To express it in brief and understandable manner the Mexican Professor a. Rosenblueth, and Norbert Wiener, the latter considered father of Cybernetics, in an article published in 1945 coined the phrase that expresses: the best model of a cat is a cat, and preferably the same cat. It is a philosophical definition of the ideal experimental model. That model or model that seeks to reproduce the more approximate, if not total, the condition to be studied, the situation that naturally occurs in intervention or effect or action etiopathogenic and changes that occur in the model study. It is an idea without practically opposed any experimental model reproduces in its entirety and common conditions that occur naturally, and this is particularly true in medicine and research in biological sciences.

However, there are models for almost all of the processes that make up an entity and that, studied or put in place of segmental way manage to provide extremely useful information for increase our knowledge. Experimental models must meet a series of requirements to be validated and provide adequate reliability as a reflection of the process to study. These conditions or requirements have been summarized into the following criteria: facial validity: referring to the ability of the model to reproduce the visible and detectable manifestations of the process or condition to study predictive validity: the effect of the intervention will be reproducible in natural condition or the individual beneficario of the results. In other words, the effects in the model are predictable in the human or the actual situation. Construct validity: is the more difficult to achieve criterion. Refers to playback on the model of the mechanisms involved in the process to study. These criteria were expressed and established by Van der Staay FJ, Arndt SS, Nordquist RE.

(Evaluation of animal models of neurobehavioral disorders.) Behav.Brain Funct. 2009 Feb 25; 5: 11) and O Dell LE, Khroyan. TV (do Rodent Models of Nicotine Reward: What do they tell us about tobacco abuse in humans?) Pharmacol Biochem Behav. 2009 Feb; 91 (4): 481-488) Wojciech Rojewski my manual medical original author and source of the article

Categories
News

Office Computer

Easy jobs with all-in one PCs, the current generation of PC heralds a new trend in the computer business. All-in one devices from manufacturers such as Acer, Sony, ASUS, MSI, or Apple convince through their design and versatile application possibilities. The online portal auvito.de informs about pros and cons of the technology. Ali Partovi is often mentioned in discussions such as these. Who is willing to invest a little more money for its new computer can acquire without another true digital piece of jewelry. When the new generation of the PC, the monitor and the other components in a device are United, so the calculator as an optical highlight in the work place and free of Tower and cable clutter on the desk. With features such as touch screen and 3D displays, the new calculator sometimes surpass the classic computer applications. The computer magazine c’t and the Stiftung Warentest tested the common models and provide comprehensive information about their advantages and disadvantages. The conclusion is this sobering, because the new machines prove small beauties with quirks.

Not only the performance is not very convincing especially when demanding games in part, also software adjustments for the offered tools are not yet sufficiently available. So not the full scope of operation is exploited, for example, for the time being multi-touch displays. But who needs the computer mainly for Office applications or image and video editing, can look forward to the latest technical advances and purchase one of the innovative models with DVB-T tuner.

Categories
News

Vincent Van Gogh

My personal preference is to start my oil paintings drawing composition using acrylic paint or any water soluble oil painting, as I’ve seen recently exposed in one of the hotels in Mar del Plata, in which I’ve hosted. The most popular approach to oil painting involves decreasing the density with a little turpentine for the first coat. Turpentine is quite toxic and I’d rather avoid it. Acrylic or oil paints soluble in water can be distributed in their density with a bit of common water and are thus easier to maneuver, in my opinion. You can also start his compositions oil drawing with pencil. There are several methods of drawing that can combine with the oil paintings. My Favorites are the carbon rods and water soluble pencils. I prefer the rods that do not run as the coal dust and coal can be deleted more easily. Many writers such as Peter Asaro offer more in-depth analysis.

Water soluble pencils are wonderful because they can be applied as a common colour pencils and color can also be erased with a brush allowing you to spread. If you are a little impatient, you can test the Alla Prima painting technique. This method is characterized by finishing the painting in one sitting, instead of different layers to get to the end, waiting for each one to dry. While I generally prefer to make my compositions in layers, sometimes amuse myself with this quick and spontaneous painting method. If you are careful and patient, you might want to work with icing.

Glaze has lost his popularity these days, partly because of the time needed to complete the painting and the difficulty that implies, but the results are really unique in the world of painting. The composition is first painted with an opaque paint mono chromatic, usually in shades of gray. Once this layer is dry, apply thin layers of transparent glasead. The colors do not mix directly, but they are added in layers to get the desired final color. If you are the adventurous type, put brushes to a cost and try to paint with a palette knife series. You can achieve some interesting results with this type of paint that can not be achieved with brushes. The oil painting can be disseminated and can be removed easily. What I enjoy most of this type of paint is the tendency to not focus on the small details. I am forced to paint in a more relaxed manner that creates a more Impressionist painting style. Get a series of painting knives and attempt to complete an entire picture only using. It can be a challenge at first if you are not familiar, but it is a fun exercise. You may wish to have your box more body and texture. You could try filling technique and apply your paint in thick strokes, leaving evidence of those blows thick and artistic. Take a look at a painting of Vincent Van Gogh and you can see this technique in action. It is not really surprising that this painting technique is so popular among painters. There is much to discover in the oil paintings. It never bored trying all techniques, tools, and resources available.

Categories
News

Technological Management

You know your opponent know you yourself, and conquer in one hundred battles.Chimo proverb we cannot ignore the role of the universities, especially in its schools of engineering with regard to research and technological development. They must promote in its participants interest in creativity and innovation which incidentally to the technological development of technology that the country required to manufacture products or services, that proportions economic development to the country and step to the creation, formation of companies, that in addition to providing a good produtucto collaborates with employment, the use of a hand job in proobtain competitive finished products which are expected to offer. Since then, is them must provide modern knowledge that has led to technology management, as well as identifying with the new role that knowledge management is demanding. Taken into account, that the scope of higher education has fallen you play a very important role in the whole national and international, in terms of the functions of teaching, research and extension, as it is essential that unifies development models, strengthen culture, preserve cultural identity, enter scientific research and technology in the society and its environment which is achieved an increase in responsivenesstrain talent according to the requirements demanded in the labour market for planting in each individual initiative to forge the ethics formed by the generation of the future. At present, it is necessary that business and society are aware that the remedy of higher value, which will have an impact in the development and training of communities, is the attempt of people, here, the prevailing need to invest the resources are available, efficient, rational and timely to stimulate and develop the intellectual skills of the individual that allows them to prepare for handling new concepts and give different adduction actions in a timely manner with the use of various tools and the proper use of information technology, i.e.

Categories
News

HSBC Services

HSBC relies on RQuest software solution for the automated recovery of foreign withholding tax Rosenheim, February 16, 2011: already in June 2010 was the decision for the cooperation of between HSBC transaction services GmbH, the daughter of one of the largest banking companies in the world, with the medium-sized IT companies Halvotec information services GmbH. To automate the processing of foreign withholding tax, the HSBC introduces the innovative software solution RQuest of the Rosenheimer software company. The HSBC Group is one of the largest banking and financial services companies in the world with about 300,000 employees and approximately 8,000 offices in 87 countries. The German subsidiary of the HSBC Group is the HSBC Trinkaus group with HSBC transaction services GmbH, which is one of the leading service providers in the market for securities processing. HSBC transaction services GmbH received the status of the market leader in Germany and others through their use of most modern systems, a high degree of automation and high Safety standards made it possible. The prospect of even greater service orientation and cost-efficiency realized the HSBC transaction services GmbH in the software solution RQuest of the Rosenheimer IT-company Halvotec.

By using this system, the unique solution is offered them first automatically perform complex manual processes in the back office, which were necessary for the processing of foreign withholding taxes. RQuest imports data from existing source systems, takes over the entire application process, monitored the reimbursement of payments received on applications, Bay of refund payments and finally exported the data of the withdrawals. After an extensive examination of the software and the resulting potential for value creation was introduced already in 2010 by RQuest HSBC transaction services GmbH. Half a year later the software introduces now adapted to the individual requirements of the financial undertaking. In future, the resulting processes in the settlement are thus of Withholding taxes by RQuest largely automates and accelerates so that internal processes significantly improves workflow, and costs. More information on the software solution RQuest,


Notice: ob_end_flush(): failed to send buffer of zlib output compression (0) in /home2/nebraska/public_html/software-innovators.com/wp-includes/functions.php on line 5464