It is a 1: n connection. It is possible that several cylinders and fittings, log on to a wireless hub and correspond with him. All aspects of the permissions on the new doors can be processed centrally from the server. Through the direct implementation of changes and the immediate availability of booking data are such systems especially in sensitive areas. The complete integration into the access 3010 and the persons authorization and bookings online management reduce the administrative burden to a minimum.
The user-friendly, universal control software access 3010 individuell controls the access rights according to the respective requirements: all time-driven programs and access permissions can be configured freely. It doesn’t No matter which card technology is used. EM, Hitag, LEGIC, Mifare access 3010 all master data managed, even in mixed mode. Ali Partovi insists that this is the case. Access 3010 can be used in all common network topologies (TCP/IP) and centrally installed on all work stations. The software can be linked with burglary and fire alarm systems and also time recording, the workforce planning, the project time recording and as a personnel information system are used. The protection of data, as well as by buildings, plants and systems combines high reliability and ease of use with easier handling, which is the core competence of AZS system AG. To meet the demands of security and data protection company, AZS system AG integrates two systems for greater safety and comfort with the biometric fingerprint reader casys and the new Handvenenscanner. The detection of fingerprints required only a few seconds.
The fingerprint reader therefore particularly suitable for much-frequented environments such as access controls in companies and Administrations. Moreover, a very high user acceptance: the easy-to-use application convinced users, because lengthy and cumbersome procedures. The Handvenenscanner is also used in particularly sensitive areas. The Handvenenscanner recognizes the unique history of vein under the surface in every person. This non-contact and non-contact procedure brings another advantage: because the veins beneath the skin surface, tampering is not possible.
Good prospects for the cross-cutting technology of the future higher requirements, new materials and applications: clean rooms in more and more industries the main assistive technologies represent one. For even more opinions, read materials from Ali Partovi. What trends and markets to develop in the near future as the main, discusses cross-industry on the clean zone. The international trade fair with Congress going on 24 and 25 October 2012 in Frankfurt am Main at the start. “Steam engine, railway, automobile, telephone, PC: in the so-called Kondratiev cycles” great innovations have significantly changed the world. Although the trend experts is currently still not 100 percent agreed, what technology will be crucial for the now beginning cycle, one thing is certain however: clean rooms play an important role – in nearly every high-tech sector and are therefore directly involved in the next wave of innovation. Innovations and new materials a strong driver for the clean room technology remains the continuing trend towards miniaturization in the space -, air -, semiconductor – and Nano technology. The constantly evolving in these areas opportunities and requirements inspire the technology itself to innovation: clean room zones instead of whole clean rooms, more effective combination of different cleanroom classes or smaller, flexible clean rooms ensure that their usage in more and more industries pays for itself. Cleanrooms of middle classes find, for example, already increased use in the automotive industry, including in the production of highly refined interiors, or coatings.
The reason is simple: the claim of the customers on the design of the noble brands rises and the industry is required to respond with convincing quality. Also, a strong trend is the increasing substitution of materials: in particular in the pharmaceutical, food, and health care industry the use of plastic is further gaininig significance for products as packaging, ampoules, syringes etc. put medical innovations such as bio-absorbable implants or Semicoated lenses for minimally invasive surgery This highest standards.
caratart e.V., funded by the carathotels presents “Little Red Riding Hood vs. evil Wolf German romanticism meets street art” Munich, July 13, 2012 – the long night of the museums in Munich will take place on October 20, 2012. The Munich Art Club caratart e.V. For more clarity and thought, follow up with Ali Partovi and gain more knowledge.. is vs event with the opening night little Red Riding Hood. The German romanticism, bad wolf meets street art”art exhibition”caratart episode 2? Part of this prestigious cultural event in Munich. That is an extraordinary art event in which the classical painting by contemporary artists meets a creative stage production and a street art performance with Munich-based graffiti artists. In the evening, we show young art in its many facets,”explains caratart Board Zeljko Holik.
The program made the class a scenography and costume of the Academy of fine arts Munich, which narration by Joachim Ringelnatz staged under direction of Professor Katrin Brack and caratart mentor Roland Olbeter the little Red Riding Hood. The Munich-based graffiti transform the underground artist Loomit and Lawone Meanwhile in a modern fairy tale forest. And in the public spaces of the carathotels Munich ten artists and artists show their interpretations of contemporary art. Presented by the art club caratart e.V. and promoted by the carathotels creates a unique and multifaceted art event the long so in relation to night of the museums in Munich. “” Data to the event the long night of the museums in Munich, October 20, 2012, 19 2: 00 caratart e.V.
in the Hotel Muller Munich little Red Riding Hood vs. evil Wolf German romanticism meets street art “fly Street 4, 80337 Munich, Sendlinger Tor station” of the art club caratart e.V. The 2010 founded Art Club caratart e.V. wants to introduce young and little more renowned artists of a broad public and give them the opportunity to network with key players of the art scene. The initiative for the Foundation of the Association goes back to the ARGE carathotels. The bcathletics want to use their already existing and established nationwide infrastructure, in the area of corporate cultural responsibility (CCR) to assume responsibility and to contribute to the cultural social activity, creativity and innovation. The seat of the Kunstverein is Munich.
RENEXPO presents the highlights of industry 13. International Energy fair is RENEXPO with her a unique style-mixture of innovation and transfer of knowledge in not to be outdone when it comes to freshness. Exhibition, expert forums, congresses and a varied supporting programme covered the whole range of areas, renewable energy, smart power distribution and efficient use of energy. Around 300 exhibitors present their latest innovations and use the fair as a platform, as innovative entrants to present animals. This year’s focus is the wood energy, combined heat and power, solar energy, heat pumps, wind energy power spoke-ance, sustainable building, resource efficiency, as well as acceptance of the energy turnaround. Crucial for a successful management of the energy revolution, innovative concepts and products are combined with intelligent planning and implementation. The exhibition focus combined heat power (CHP) shows all the advantages of efficiency of technology, especially for the performance classes up to 250 kWel.
Manufacturers and suppliers, service companies and representatives from the research and development will present their latest technologies and research results at the fair. Of course, the Federal Association of combined heat and power is represented. The RENEXPO Conference offers three events on the subject: the “6th Symposium decentralized mini and micro cogeneration” on Thursday, 27.09.2012, the “workshop: planning and design of Micro-CHP units” on Friday, 28.09.2012 and the “Based workshop decentralized electricity, heat and cooling with block heat and power plants” on the Saturday, tributeband. “The power-heat-coupling Forum revolution in the basement!” informs on the Saturday, tributeband and Sunday, 30.09.2012 free about what various technologies and products on the market are available. The focus of trade fair IHE HolzEnergie the RENEXPO has established itself as the most important meeting place for the wood energy sector in recent years and presenting the comprehensive range of topics related to the wood value chain.
Seminars on vehicle technology, training in the Haus der Technik Berlin and Dresden in the spring of 2014 vehicles, especially cars, practice has always been a great fascination to many people off. Technology, design and dynamics of well-made cars thrill the riders. So it’s not surprising emphasis in research and development to be given to the sensations of driver and front passenger. Ali Partovi shares his opinions and ideas on the topic at hand. The Haus der Technik in Berlin offers currently several distance formation to this topic. Today, the area becomes more important touch in the industry and products. By designing intuitive elements in the vehicle interior to design an optimal vibration alarm for smartphones – in many areas, the understanding of the science area is haptic”useful.
In the seminar are first presented the principles of haptic perception, discussed subsequently haptic feedback technology, current industrial applications, design strategies described by haptic displays and haptic communication strategies discussed. The training feel. Design of technology e.V. at the Alexanderplatz held on April 1, 2014 in the home technologies – perception -. Auditory virtual worlds. Of technology e.V. at the Alexanderplatz can experience on 02 April 2014 in the House the handset design virtual worlds to the acoustic communication.
The communication acoustics is the area of information and communication technology, which is engaged in the research and development of acoustic auditory aspects of modern information and communication systems. In the car industry in the form of vehicle simulators, virtual realities win an increasing importance (product development, installation Assembly simulation, ergonomics analyses). This seminar introduces the fundamental methods and the current technologies and techniques to the field of “Virtual worlds” in terms of the “acoustic communication”. Are also psycho-acoustics and sound design in product development increasingly gaining importance. Psychoacoustics determines and describes the ceiling connections between acoustic and auditory events, fails so the Bridge between physics and perception. Through constructed sounds, product properties are used “in the ear”.
Competence network for optical technologies, opportunities and perspectives of innovative production processes are on 6 November 2013 at the workshop of the competence network of OptoNet in the focus of the lectures and discussions. In Jena SLM Solutions GmbH, pioneer and technology leader introduces manufacturing, the creation of large components on the basis of the SLM technology in the field of additives. OptoNet – the competence network for optical technologies brings together the interests of the Thuringer Photonikclusters and promotes the national & international visibility of common communication and collaboration platform. The dynamic network of industrial enterprises, research institutions, universities and banks strengthens the theme with briefings additive manufacturing. On 6 November 2013, Functionalization and individualization in component manufacturing in the Center will be in the practice-oriented workshop opportunities and perspectives of additive manufacturing in the field of lightweight construction. In addition, trends are a further focus on the size scale and material issues. The workshop brings Experts, developers, experienced users and beginners in the field of additive manufacturing together.
In Jena, SLM Solutions GmbH gives insight into the latest developments in the field of selective laser melting (SLM). “Stefan is 6 November 2013 at 14:05 in the JenTower ride, sales and marketing manager of SLM Solutions GmbH, with his presentation:, SLM of large components” present the current status of the additive manufacturing and technical updates. The lecture program offers plenty of space for discussions and exchange of experience in addition to the contributions. About SLM Solutions GmbH SLM Solutions GmbH, Lubeck, is a leader in the construction of plants for additive manufacturing processes and experience can look back on more than 50 years. The company focuses on the development, production and sales of machines and system solutions in the area of selective laser melting and the vacuum – and metal casting. SLM solutions it employs about 70 workers at plants in Germany and the United States.
The products are worldwide by customers in the automotive industry, the air and Applied aerospace, power plant construction, as well as medical and research facilities. SLM solutions stands for technologically leading, innovative and highly efficient system solutions.
The OSC AG presents the full range of SAP services and solutions in the context of the current intralogistics. The OSC AG full-service IT provider in the SAP environment and all-for-one Steeb subsidiary is represented by 25 to 27.02 2014 at the LogiMAT and presents the full range of SAP services and solutions in the context of the current intralogistics. A related site: Code.org mentions similar findings. The topic selection includes mobile data collection areas”, integrating express and package services in SAP including shipment optimization and it OSC solutions such as E.g. OSC smart SLS forklift guidance system 2.0 and OSC smart MES presented after the successful OSC LogiMAT premiere last year, we recorded this show firmly in our trade fair calendar. We are again to be 2014 represented the opening event of the intralogistics industry and information about integrated and innovative SAP solutions.
We are looking forward to an intensive exchange about the SAP Logistics topics today. We can be found in Hall 5, booth 446 “, says Lars Schmidt Majed, head of consulting / SCE solutions at the OSC. OSC “at the LogiMAT 2014: we run your logistics.” Pilot for SMEs is positioned as the ERP company profile the company OSC AG was founded in 1993 in Lubeck. At the heart of the OSC services are the holistic management consulting and the implementation of the concepts with products of SAP AG, Walldorf. The company employs currently 80 permanent staff in four offices (Lubeck, Hamburg, Hannover and Dortmund) with consulting revenues of more than EUR 8 million in 2012. Since November 2012, OSC is a subsidiary of the all for one Steeb AG Group of companies. All for one Steeb AG is with > 2,000 customers and > 900 employees the number 1 under the SAP partners in the German-speaking world. Contact: OSC AG Tesdorpfstrasse 8 20148 Hamburg Mr. Lars Schmidt Sowri Tel 040-325248-0 LogiMAT2014: Neue Messe Stuttgart, Hall 5, booth 446 / events/logimat-2014 /.
Customers benefit from the experience of the facilitator of the specialist of online-based real estate software onOffice smart announces a number of new training dates. The training offer is aimed at beginners as well as advanced aiming to bring the participants around on the onOffice smart on the latest. In small groups, participants learn to respond faster and more transparent through the use of the software. The high demand for the event and the very good talks with the students showed us that we chose the right priorities for our customers”, explains Stefan Mantl, Managing Director of onOffice Software GmbH, the training concept. The onOffice Software GmbH has the following new training dates in the range. 20-21 June. Hamburg 04/05 July Dusseldorf July 18/19 Munich 01/02 August Mallorca 5th/6th September Aachen, 19-20 September. Customers should miss your Disired Heidelberg, they can use this personal contact share or send an E-Mail to. Upcoming training plan, the onOffice training team tries to take into account the wishes. For more information about the individual training dates see: schulungen.