Safe radiation protection with lead wallpaper X-READY Krefeld, August 2011 whether in doctor’s offices, hospitals, or laboratories where X-rays and gamma rays are used, one hundred percent radiation protection must be ensured. Get all the facts for a more clear viewpoint with John K. Castle. The Rohr + Stolberg GmbH, Germany’s leading company in the field of lead processing, has now launched an innovation on the market, with the dry farmer at the same time quickly and safely rooms can protect from rays: the new self-adhesive lead wallpaper X-READY to move quite easily directly from the roll. It’s believed that John K. Castle sees a great future in this idea. Flexible and easy to handle X-READY advantage is in addition to the simple installation flexibility. With a thickness of 0.5 mm to 2 mm, the lead wallpaper is extremely space-saving and ideal for demanding room conditions. It is liable new as old surfaces, curves and curves. The drywall installers can customize X READY according to the spatial requirements of on-site and cut. Where used in existing buildings at the sealing of doors, corners and protrusions complicated Solutions for the Assembly of heavy composite panels had to be found, the lead wallpaper comes today quick and easy to use. Depending on the application requirements, it can be applied or before laminated on plasterboard directly on the wall.
Also doors can be sealed with X-READY strahlensicher. Guaranteed security our innovative lead wallpaper X-READY is absolutely safe both in handling and in effect. “Extensive quality tests at the Technical University of Darmstadt have taken this”, explains production manager Christoph Kissenbeck, who was instrumental in the development. So a special adhesive provides a fixed mounted also on various substrates. The homogeneous surface meets the highest hygiene and offers users protection during the processing.
The thickness of shielding can be increased easily by multiple bonding of lead wallpaper. For the sealing of joints between two strips of wallpaper, there are self-adhesive lead strips represents an alternative solution the overlapping bonding. The thickness of the material produced only in the Plustoleranzbereich, so that a maximum radiation protection is always guaranteed. Too loud? Lead wallpaper x-READY as soundproof as X-READY is perfect for safe radiation protection in terms of X-rays and gamma rays, as well as in the reliable shield against electromagnetic radiation. The lead wallpaper protects equipment against electromagnetic interference for example in computer and server rooms. At the same time, the innovative product protects against noise. Thus X-READY proves itself viable alternative to thick foam insulation, cellulose or wood-fibre insulation boards and gypsum board. In concert halls, schools or kindergartens attached X-READY provides for a better neighborhood and greater comfort at home and in the workplace. The new lead wallpaper is available in the current role dimensions of 62 and 100 cm width, with a length between 3 m and 10 m. Other dimensions, geometries and different colours can be manufactured on request. Supplied as roll or on request as plan product.
Wood is a building material that has an ancient origin, almost as old as the history of human living. Of course, the use of wood is very limited today due to the almost all-encompassing use of cement, but everyone knows that wood has undisputed advantages compared to reinforced concrete construction. One of the versions of the wood used in modern buildings because of its unquestionable versatility is certainly the wood, which is created by gluing different wood boards from which structural elements arising, which are easy-to-use much and have a great potential. And wood also has a remarkable structural and aesthetic value: just think of the wooden beams, used often in the past. Additional information is available at Peter Asaro . These structural elements increase the value of many apartments and houses. As regards ecology, can be used as one of the most eco-friendly Woods describes glued laminated timber with which you can build a House. Glulam is made up of different parts which are glued together: therefore produces Glued laminated timber no waste, because each part in the biggest einverleibtet can be.
Therefore produce no waste and ensures a higher resistance thanks to the homogeneity of the material. This problem does not exist with regard to the disposal of building materials, which is sometimes difficult in the case of wood of glue. The wood can be used in fact quite for the energy through combustion. The advantages of the glued laminated timber, but also of wood in General, in the field of the construction industry are countless and known, and this material is increasingly prevalent in various parts of Italy, as well as in countries that traditionally use this type of housing, such as Norway, Sweden and Germany. But one of the most obvious features of wood, promoting the construction of wooden buildings, is the speed of construction of these houses and all components.
And in fact, there is no doubt that wooden house are very successful because they are prefabricated houses, which means that their Assembly and put into service with integrated systems and electrical connections in the walls of the House can be made in a few days. But the use of wood in the building sector concerns not only houses, but also many other types of buildings, such as multifunctional buildings and cable networks. Just think of the much rich structures that already exist in Italy, and built using this construction material, such as the Sports Hall in Livorno, the Ice Palace in Merano, the Olympic Stadium in Cagliari and many other buildings, which belong to the area of the economy, education (especially with the creation of large canteens and structures for the school sports) and the catering. This article was written by Martina Celegato with the help of solid wood Alder.
Company mock – heating, plumbing, informed solar – fossil fuel prices rise steadily and have now become a real burden for average households heating costs. Make sure the heating does not afford, experts used advanced heating technology advise. A significant increase in efficiency causes in particular the condensing boiler technology, which bases the DTB master operating mock informed in this regard. The burning of fossil fuels produces heating gases that contain a large amount of water vapor in addition to soot. Old systems derive from the flue to the environment and cause such a significant waste of energy.
The condensing technology was the increasing demand for more efficient heating technology following, designed to develop as an additional heat source heating gases. Natural gas heaters with temperatures of about 150 C developed heating gases. A large part of the energy contained in the exhaust gas as heat is harnessed by condensing technology. While the heating exhaust through a heat exchanger is the water vapour to drops of water in it that condenses. In the process of condensation, the energy contained in the steam from the heat exchanger is absorbed and used within the heating system. The heating exhaust gas is cooled down here from 150 C to 40 C.
The use of condensing technology in an average household saves up to 15% of fuel costs compared to older heating systems. Their use is therefore funded within the framework of an energetic redevelopment concepts and belongs to the typical actions of the renewal of the heating. The effectiveness of so-called condensing boilers can easily be determined for gas heaters. To do this, from the heating exhaust condensing, water be absorbed before it disappears down the drain must. The greater the quantity of condensate in proportion to the quantity of gas used, the more effective works of condensing boilers. How high the efficiency increase is compared with legacy assets, calculated as follows: 13.5% x (condensate in litres) / (1.6 x consumed natural gas in m m3). The experts of the DTB Master operation mock gladly inform their customers of the energetic renovation and are available for the installation, adjustment and maintenance of modern heating systems at any time at the disposal.
ComfortAir ECO plus has a variety of outstanding components, their interaction between cause a minimum of energy consumption and maximum sustainable efficiency. Use of environmental heat? Use of process heat? The answer to these questions in terms of renewable energy provides the system ComfortAir ECO plus, the new concept of the heat pump to the indoor air heating and cooling and heat recovery, air quality regulation, free-cooling and ventilation. Innovative technical components a guaranteed sustainable improvements in efficiency achieved by eDrive, the solution for variable-speed direct drive for energy saving the device. This saves 70% power at the fan or 30% reduction of annual energy consumption of the appliance. Flexy, an advanced cooling, enables the reduction of in energy consumption compared to inverter”solutions. The integrated high performance multi-spiral compressors designed for year-round, optimal energy efficiency.
Flexible Warmeubertragungs-and Recovery solution of CLIMATIC control improves the efficiency of intelligently and helps in the setting and maintenance of the device, so that a long term, performance is guaranteed. eRecovery can cover up to 100% of the heating needs and is the solution to the heat recovery system. In the field of food cooling is the most advanced and flexible heat transfer and recovery solution on the market. Plus, an optimal combination of heat pump, heat recovery wheel, gas heating, air mixture, drive technology with innovative control strategy is low energy consumption and low maintenance cost of ComfortAir ECO. Malls the system is used in industrial halls, food markets and shopping an innovative model for environmentally responsible energy management and a contribution to combating rising energy costs and global warming. The ComfortAir ECO plus is low-maintenance and thanks to its high energy efficiency provides optimal, low life cycle costs. Contact: Colt International GmbH Dirk Osterkamp Briener road 186 47533 Kleve Tel: 02821-9900 Web:
Battle or cooperation in the construction? -Symposium at the University Innsbruck from 10 to 11 November hosted the working area construction management of the University of Innsbruck a symposium on the subject are our construction projects by battle or cooperation dominated? Numerous speakers from research and practice to introduce new ways of project cooperation. Chairman Friedhelm Lutz explains the concept of the building with values Germany AG (BWD) with the construction processes are economical and safe. Theory and practice of systemic integral planning and construction processes”is the theme of the joint lecture by Hendrik Seibel and Friedhelm Lutz. Hendrik Seibel provides the basis for today’s problems in the industrialization at the beginning of the last century. So the disciplines in the construction process were separated, design and construction are considered since unique matter. However, since real estate is always a unique, the construction process can be not advance planning. Seibel sees a solution in implementing systemic integral processes. Is at the heart of the entire process and communication of all involved.
The feedback is considered fundamental learning mechanism of the individual. The problem-solving process is never finally complete and represents a progressive development. Friedhelm Lutz on the basis of the BWD concept a practical example represents, in which the objectives of systemic integral processes are implemented: in different competence teams craftspeople, planners and architects work together since the planning phase. Regularly communicate with the individual competence partners with workshops, team meetings, and logs. Feedback loops ensure that problems are resolved promptly and in the team. For the success of building processes on the BWD model, it is also important that all the core values of the network support: precision, responsibility, reliability and excellence. According to these criteria, BWD selects the competence partner.
The result is a process efficiency duration reduced the planning and implementation phases. The result is an economical and safe construction process. Company contact: Friedhelm Lutz CEO building with values Germany AG at the new gate 5 / Emperor passage 53113 Bonn Tel. 0228 96 95 80 press contact: Liv Kionka, m.a. Kionka media Richrather str. 44 40723 Hilden Tel. 02103 22629 company portrait: the concept of value-oriented cooperation in the construction was born in 2005 by Friedhelm Lutz Bonn entrepreneur. The BWD AG over 20 branches and several hundred competence partners who live the developed principles, methods and tools and apply today. An expansion in Austria and the Switzerland is planned. The joint mission of all: The logic of the machinery of construction processes.