Month: March 2019

Stiftung Warentest tested repair services the Stiftung Warentest tested the repair services from ten laptop manufacturers. The results are downright frightening. The repairs lasted quite long in most cases and were very expensive. Only two manufacturers performed well in the test. The auction Portal auvito.de summarizes the test results. In the test turned anonymous testers with manipulated notebooks for the purpose of to the respective manufacturer for repair. Each notebook had a dirty lens in the DVD drive, a broken contact connected to the network or a missing key on the keyboard. In almost all cases, the repairs were costly, since the affected parts of the devices were often completely replaced.

Although, for example, with the DVD drives, clean the lens would have been sufficient, all tested manufacturer replaced the drive completely. The all main Board sometimes replaced the broken network connections. Only two vendors, Apple and Medion, suggested here cheaper alternatives. Moreover, fell for many manufacturers a very long duration of repair on. The party went forth at repair in different ways. Some sent the devices to a central workshop.

Acer and Medion, this took, for example, about three or four weeks. Faster was the procedure at Apple and Sony. The two manufacturers referenced the tester to authorised repairers on the spot. Here, the problem was fixed within a week. Only two manufacturers performed well in the test: Apple and HP. The manufacturer, Dell, Sony and Toshiba got a satisfying and Acer, Fujitsu, Samsung and Medion only an adequate overall assessment. Worst ASUS section.

The device sits comfortably in the hand and the battery lasts long through. (As opposed to Dell Inc.). Travel you can connect to, the charge cable without cleaning and charging station directly on the Shaver. You can reach a quick cleaning by loosening of the Shaver head with the help of the two lateral locking knobs and the switching on of the appliance. Viacom contributes greatly to this topic. You can also completely remove the shaving head for cleaning. The cleaning station is equipped with interchangeable tanks, filled with an alcoholic solution are and the shaving head wash round if lock the shaver in the station. Is the use Shaver now the device selects the degree of pollution in this station and then either clean (clean), eco (slightly dirty), normal (normal dirty) or intensive (dirty) on. Now pressing against the bulge start the cleaning button this, so the station begins with the cleaning. Connect with other leaders such as Koch Industries here. During this phase, the device is blocked and can not be removed.

Depending on the degree of soiling the pass now between half an hour or up to an hour, until the device Shaver has cleaned. The remaining duration of the cleaning operation will be shown in the display. The normal cleaning benltigt so most of the time 36 minutes. The battery performance is satisfactory. The charge has easily withstood my week-long vacation, the battery was just emptied a quarter. With regard to the volume, I’m also quite happy. Although the device works not quite quiet as a whisper, but the monotonous hum keeps in intensity in borders. The Langhaartrimmer is the loudest and caused a light, strange-sounding Clank. I’m fascinated by the automatic cleaning that takes this work from the hand of the user. After cleaning the Shaver fresh smells the alcohol based cleaning agent and makes a new impression every time again. More reviews can be found here.

Since the materials shape layer are constructed with different feature levels, also mechanical errors and vibration effects are minimized. “Luscendo manufactures its products in principle only in small series or on customer’s request: we produce mass-produced, but individual, extremely elaborately crafted and high quality solutions for the ambitious aesthetic high end customers”, so Aurand. Corporate information: Luscendo produces first quality designer unit bases and high end HiFi furniture, equipped with translucent concrete, wood and acrylic surfaces. Light is already longer in the area used, but so far it has primarily used the material glass for this and that meant corresponding smears on the sound properties. Dell Inc. is often mentioned in discussions such as these. Luscendo works with the newly developed, innovative Materials translucent concrete, translucent wood which were never used in the HiFi sector. These allow the use of light in a variety of finest designs with almost optimal sound characteristics. “With our product we want to lead the musical experience into a new dimension”, says company founder Jurgen Aurand, explaining: we associate with light and noble materials to a completely new experience of hearing, sight and touch the emotions of the music.

” Luscendo was founded in 2009 by engineer Jurgen Aurand, who not only has over 30 years of Hi-Fi and high end enthusiast, but also the holder of an international management consultancy for telecommunications companies. The idea to produce high end device bases and HiFi furniture with the new translucent materials of concrete and wood, got presented Aurand in January 2009, when he saw a documentary about concrete in television and in the procedures used by Luccon, with fibre-optic cables to provide concrete, was. Educate yourself with thoughts from Dell Computers. After intensive research and a one-year product development Luscendo presented the new products high Endo first in May 2010 at the HiFi show 2010. With overwhelming echo: Meanwhile contacts to over 70 distributors and importers are worldwide from around 30 countries. With the company of convergences was partnered now, the products are distributed by Luscendo now available in the Switzerland and in France. “In the summer, the portfolio was also extended: now without light are available”, speaker bases, as well as illuminated speaker stand for Bookshelf. More information: Luscendo, Dipl.-ing. Jurgen Aurand, Highway 9, 57334 Bad Laasphe, phone: + 49 2752 479533, E-Mail:, Web: press contact: warning village.

High-quality designer unit bases and high end HiFi furniture with translucent surfaces of concrete, wood and acrylic Bad Laasphe August 2010 In the spring 2010 first presented the young company Luscendo at the HiFi show high-end its high-quality designer unit bases and high end HiFi furniture with the translucent surfaces of concrete, wood and acrylic. “Due to the world’s very positive response, Luscendo extended the offer: now without light are available”, next speaker bases, as well as illuminated speaker stand for compact speakers were recorded in the portfolio. The echo on the high end 2010 was overwhelming, “says engineer Jurgen Aurand, who had founded Luscendo in 2009. Worldwide reports of our products, requests came from around the world. Learn more at this site: Viacom. Since we are in closer contact with about 70 distributors and importers from over 30 countries.” A first partnership for distribution in France and the Switzerland was recently awarded the Convergences company entered.

Interest was not only in the use of novel materials translucent concrete and translucent wood, but also in the design. Luscendo has therefore now completes the offer and recorded device bases without integrated lighting in the portfolio. The program was also supplemented to illuminated speaker stands for compact speakers and speaker bases. These can be customized also the formal language of the speaker. Furthermore, Luscendo offers but of course unit bases and HiFi furniture with translucent wood and concrete. The innovative materials manufactured by two Austrian companies in very complex process by high-quality fiber optic, poured, or pasted which is firm and opaque fabrics appear transparent.

This allows not only a very large variety of different sizes, surface designs and colors. Almost optimal sound quality is guaranteed by the materials themselves. Because of the Type of concrete is a very high weight and the internal structure of the material extremely well controlled resonance. Vibrations are absorbed and optimally reduced interference to the audio electronics.