and 45mm. performing the role of the crates, the line for the production of C and U shaped profiles, thermal profile. Technology light steel thin-walled structures (LSTC) is combined with any conventional technology, by adding them to their advantage: the high rate of construction, low operating cost, free planning, environmental friendliness, are complete structures on the object geometrical precision of design and a variety of external finishes. Building structures based on thin-walled galvanized steel profile can be used to produce shallow foundations and the reconstruction of the roof at old buildings without increasing substructure due to its low weight. (See details on site roll forming equipment (machines) are designed for manufacturing corrugated roofing and wall material (trapezoidal sheet) with trapezoidal corrugations in height from 6 to 75 mm roll of metal with painted and galvanized steel, thickness 0.5 … 0.1 mm. Sheeting line includes: Unwinder, rolling mill, guillotine, ASU, or roller Stacker. The high quality finished product provides a consistent method of profiling. Sheeting – a godsend for proektirovschikov and designers, quality and reliability for builders in the manufacture of facade and roof. Production of corrugated board is constantly evolving, new types of profiles for different purposes, increased production volumes.

Operate in the near infrared range. – Thermal. Work in the far infrared spectrum and use the principle of converting the image of heat radiation target and surrounding objects. Practical interest for the consumer-hunters are primarily all IR devices, since the cost of thermal imagers still quite high. As for the infrared device, the best results show, of course, active night vision equipment. Only that: the active radiation can be detected by instruments and hand position unmask. This prevents their use in the military, but hunters this fact does not interfere.

Night vision device consists of the following elements: optics, electron-optical converter (EOC), power supply, as well as housing and eyepiece. Light reflected from an object passing through the lens, is projected onto the image intensifier entrance, where an electronically magnified and transmitted to the eyepiece. It is clear that the quality of consumer night vision device is directly dependent on the quality of the above elements of the device. What helps to make an accurate shot? The shot, which is the logical conclusion of any hunting. Of course, training, experience, and keen eyesight … But the possibilities of the human eye has its limits, and the arrow came to the aid of technology – there scopes. The sight is to clearly and accurately distinguish target determine the distance to it (if there is distance-scale) and put weapons in the right spot. Were created by the compact size and weight, night-vision sights for firearms. But they have long remained inaccessible hunters because of legal constraints and high costs. In 1993 he published a Federal Law "On Weapons ', in article 6 which states that the Russian Federation is prohibited' set for civilian and service weapons sights (sighting complexes), night vision scopes except for hunting, the use of which is established by the Government of the Russian Federation, as well as selling them. " In fact, it was allowed to use the sights at night vision for hunting purposes. But, to follow the law, you need to know what kind of sight is an eye for hunting. Structural differences of hunting rifle scopes from the military that they are often equipped with infrared illuminator, which is not permissible for military scopes. It is worth noting that almost every night-sight can be used as a simple observation night vision device, as well as for photography and video. In Either way the decision to purchase and / or using night vision sights for hunting, each hunter takes for himself, and most importantly – do not use it in places where hunting is prohibited night-sight. In prohibited areas should be used night-vision observation devices, and hit the target, for example, using fluorescent aperture optical sight.

To do this, the resort has all conditions. Knowledgeable guides tell and show how to see all the hidden beauty. It is possible to climb almost any mountain peak in the Caucasus and fully enjoy the stunning scenery and excellent nature of the plateau Lagonaki. Lovers Extreme invited to test himself in the alloy on a fast and raging mountain rivers. It offers visitors and ski resorts of Krasnodar. The resorts of Krasnodar region can not only improve their health and get holiday fun but also enjoy the extreme and active sports, as well as visit places of interest in the heap.

Becoming increasingly popular not travel to foreign countries, as has happened the past 20 years, and a great vacation for the burgeoning resort of Russia. Place to rest very much to love for residents of other countries, and for our fellow countrymen have become resorts of Krasnodar region. Currently, resort towns undergone many changes. Permanently removed the old boarding houses that are built on the lowly Soviet technology. Every year, everywhere in the Krasnodar rise resorts and new entertainment complexes hotels built in the modernized style of architecture and equipped with modern technology. Any resort town in Krasnodar Territory is pleased to offer entertainment for any holiday – from the simple to the mega-elite. If you plan to gain strength and health for the whole next year, come to rest on the Kuban River. Black Sea resorts are waiting for you all year round! Rest in Krasnodar region – it's not just beaches and sea – Krasnodar resorts offer, mountain tourism as an alternative. To do this, the resort has all conditions. Knowledgeable guides will tell and show how to see all the hidden beauty. It is possible to climb almost any mountain top Caucasus and in full to enjoy the stunning scenery and excellent nature of the plateau Lagonaki. Fans of extreme sports are invited to test themselves in the alloy on a fast and raging mountain rivers. It offers visitors and Krasnodar ski resorts. The resorts of Krasnodar region can not only improve their health and get your vacation pleasure, but also enjoy the extreme and active sports, as well as visit places of interest in the heap.

Gloss varnish has glitter – 80-90%, semi-gloss – 40-50%, 10-15% Honed. Tips: – To cover with varnish floors, which are in use will be subject to heavy load, it is better to use polyurethane varnish. They are more resistant when compared with acrylic or alkyd. – To avoid loss of color and all sorts of troubles related to color the surface, which may occur over time, we recommend you first soak the work surface antiseptic, and other protective compounds before applying the lacquer itself. – The application of additional layers of coating gives better resistance to external influences. So it is better to apply two or three thin coats than one thick.

- The surface, and it is very important to be 100% dry, flat, buffed from grease recommended by the solvent. The surface should be dust and dirt. – For the best quality and smooth coating to use polishing. The first layer of varnish can be sanded grit abrasive sandpaper fine. This will improve the quality of adhesion to subsequent layers. – Remember that many lakes, including two-component, are toxic! Before applying please read the instructions and, if necessary – use personal protective equipment: rubber gloves, respirators and goggles. To varnish and paint in a closed unventilated room is dangerous!

For the benefit of others and their Primaplex advantages mentioned above. In addition, the layered masonry, they can serve as an air and vapor barrier that reduces heat associated with convection air. Thermal insulation of the roof was through the roof there are the greatest heat loss. Well insulated roof provides energy savings throughout the building: it is easier to maintain optimum temperature and humidity conditions in the under-roof space, and therefore can extend the life of roofing and the building. The range of tiles on the roof Primaplex very wide: it can be as flat and pitched roof construction, new buildings and exploited. In the case of insulation plates are stacked old roof on it right – first remove the roof waterproofing or no ties to carry out repairs necessary.

On pitched roofs solve the problem of thermal bridges, which occur when the roof insulation with a soft insulating between the rafters. Finally, Primaplex can be used when constructing roofs of contrails, which used in the creation of pedestrian terraces, "green" roofs, autoparkings. Insulation of underground facilities have already mentioned the possible negative effects of exposure to the construction of frost heave. Their can be prevented or avoided altogether, having insulated underground part of the building. Partially solves the problem of the device under the foundation of sand bags and sand backfill. However, to fully counteract frost heave is not enough – it is necessary to insulate the foundation around the perimeter of the building. The use of expanded polystyrene slabs allows the walls of the underground facility to store heat and provides a constant comfortable temperature in the space under the ground in winter and summer. Warming of the foundation will reduce heat loss, will prevent the walls from condensation, mold and mildew. In the insulated basement rooms without additional heating temperature is maintained +5-10 C. Heat protection by insulation greatly improves durability Primaplex waterproofing membrane that protects the building from the effects of soil water and moisture.

Nevertheless, Most restaurateurs recognize this category of staff the most problematic – good cooks hard to find. Learn more at this site: ISearch. So, for example, some restaurants (mostly network) organize intra-system of education. Career ladder chef: Chef – cook foreman – sous chef – chef. But in general, to become a true creative chef, you need to constantly monitor the latest trends and be a fan of eating. As one eminent chef, 'must be curious person, always poking his nose into other people's books and special dishes.

" How elegant and extensive dining menu, the greater the appreciation of the restaurant. Therefore, the position of chef is very popular. In his competencies are not only the purchase of products, technology, cooking and serving dishes. Chef – a creative person, the creator of culinary delights.

But it is still possible to allocate some blocks that are common to all systems on alert fire: – digital alarm system is controlled by the computer through the matrix block, which is part of the system – power-switching signal – equipment to amplify the signal, which come from the source (Eg translational microphone, mp3 player, etc.) – radio microphones, which are used to working remotely Manager – speakers (in the horn performance, wall and ceiling speakers). If we divide the system alerts the principle of operation, they are local and centralized. Current warning systems must comply with certain rules and regulations. These rules are contained in several documents (regulations). In addition to regulatory documents they must be certified on a mandatory basis in compliance with Ukrainian standards of fire safety. The recommendations of the sound design of the buildings said that the warning system is better to use written advance the message, because during an emergency voice narration can be undisciplined. Ideally, the vote must be neutral and calm, so that will suppress panic. Message should contain necessary for evacuation information. Only with the correct use of alarm systems will be able to perfectly fulfill its role in emergency situations in case of fire or other disaster.

In the body design of insulated vans used several types of heat-resistant materials, mostly plastic foam, polystyrene foam and Isover. Walls insulated vans (refrigerated trucks) produced in Japan and South Korea can be made of different materials: plywood, plastic, steel, aluminum or stainless steel, but experience shows that the Japanese use refrigerated trucks in Russia for the transport of food, body, preferably, should be made of galvanized steel. In production refrigerators used frameless assembly technology and lightweight materials are used, thus reducing vehicle weight and increase the mass of transported products. This type of assembly attaches to the complete design tightness, which is very important to maintain a constant temperature inside the body. Despite the strength and reliability of the construction of refrigerators, should be carefully followed to monitor and prevent the slightest possibility of body corrosion or mechanical damage to the insulated van, so how to restore the tightness of the refrigerator, then it will be difficult and expensive. The main part of the refrigerator, which actually makes commercial refrigerator – a refrigerator. There are three main types of such plants: autonomous, installation of direct-drive with eutectic plates. Direct drive means that the installation powered by motor vehicle.

This option is used in small amounts Body refrigerator. On those machines, which make frequent stops associated with opening doors (eg transport of ice cream) are used installation with eutectic plates. These plates before the operation (eg at night) are frozen to a certain temperature of the external electrical network, and then all day support necessary Body temperature inside the refrigerator. The most convenient (but not the cheapest) and most popular installation – standalone. They are connected to external power and can handle a car with a very large body. Japanese Used refrigerator, a very popular car in its segment. The cost of such a used car is not high, as the chassis, the van and the refrigeration unit uses a very reliable Japanese components, and build quality is immeasurably higher. Now the situation is that Japanese refrigerated trucks with 5-10-year life, according to their quality surpasses Russia's new refrigerated.

For the physical control of passage through an access point on the electronic board controller Lenel provides two outputs, one of which controls a door contact (reed switch) and the other – to exit request button (REX). At the same time device has an output for control lock and general-purpose output, which can connect any signal equipment, such as a siren or light signaling device. LNL-2210 also has a specially Dedicated input for tamper switch which is mounted in the housing of the controller Lenel to install, and if it sends a tamper alarm server. New NICs Lenel LNL-2210 has already received the Russian market, but their retail price is 1010 USD, including VAT. For more information on deliveries of equipment, as well as design and installation of Lenel Access Control brand, please email mail or by phone (495) 787-3337 for the company's managers "ARMO-LINE", which is a certified partner of Lenel Systems International. The company Lenel Systems International is one of the world's leading manufacturers of software, hardware and access control integrated security systems based on them. The platform includes OnGuard: access controllers, modules, readers and input / output, control panels, video recorders, and software for video surveillance systems, control access, time tracking, security alarm, access control biometric system, applications, printing access cards, etc. Lenel Integrated security systems differ in their reliability, efficiency, scalability and widely used in offices the world's largest companies.

Coating is applied in several types: acidic, basic, rutile, cellulosic and blended. According to the purpose coating is divided into two types: defensive (tolstopokrytye electrodes) and ionizing (tonkopokrytye electrodes). To better understand the differences between these types of coatings, it should be noted that the quality of welding electrodes coated with an ionizing inferior welding electrodes with a protective coating, the first type of coverage does not able to protect the weld from oxidation and nitration. Myglobalsearch is often mentioned in discussions such as these.